Hello.I try to create command like this
“Command”: “if_v2”,
“Target”: “${Variable1} > [${Variable2}+200]”
But is not working.I mean with this command, system comparing only if variable 1 is greater than variable 2 and ignores the +200.Does anyone know the correct syntax ?
I recommend that you improve the formula by creating variable 3 that includes the value with the 200 added up in this way you will make a simple difference between variables. It does not seem clear to me the formula so written.
Yes i tried also .For example i created variable 3 to be 100+200 but the result was not 300 but shown as “200+100” .Maybe there is other symbol in order to summary 2 numbers and not the “+” symbol.
For example i do this
“Command”: “if_v2”,
“Target”: “${Variable1} > [{Variable2}+{Variable3}]” (var2=100 and var3=200) but on echo the result showing as “100+200” (but it should be 300) so comparing variable1 with 100 only.This seems not summary the 2 numbers [{Variable2}+{Variable3}] .
You need to use the Javascript “Number” conversion to make sure the string content is treated as number, and not as string. This works:
Number (${var1}) > Number (${var2}) + 200
Example:
{
"Name": "greater",
"CreationDate": "2019-9-23",
"Commands": [
{
"Command": "store",
"Target": "100",
"Value": "var1"
},
{
"Command": "store",
"Target": "22",
"Value": "var2"
},
{
"Command": "if_v2",
"Target": "Number (${var1}) > Number (${var2}) + 200",
"Value": ""
},
{
"Command": "echo",
"Target": "var1 wins",
"Value": "green"
},
{
"Command": "else",
"Target": "",
"Value": ""
},
{
"Command": "echo",
"Target": "var2 wins",
"Value": "blue"
},
{
"Command": "end",
"Target": "",
"Value": ""
}
]
}
1 Like
Thank you very much ! This makes things more simple and easy !
Hello 
.This works fine for numbers.But is it any way when we need to compare percentages ?
I mean if i do
{
“Command”: “store”,
“Target”: “105%”,
“Value”: “var1”
},
{
“Command”: “store”,
“Target”: “20%”,
“Value”: “var2”
},
{
“Command”: “if_v2”,
“Target”: “Number ({var1}) > Number ({var2})”,
“Value”: “”
},
Then there is problem because system showing var1 is lower than var2 .
This is because reading only the first 2 numbers of amount 105% .
So reading it as 10 which is lower than 20.
If_v2 command responds good up to 99% but when goes more than 100% does not work.So is it any way to store variable as percentage to fix this ?
Also i would like to know if there is a way to store a variable as time like 12:55:00 .
Thank you !
Remove % in variable and after the result you add agains in this mode you elaborate numbers only.
Can not remove % .It takes it from webpage using storetext command 
Yes you can remove it, execute if command and after readd it, it’s simply.
If you confirm that works with number use in if_v2 number numbers only, after if you readd %
With what command to remove % sign .Is not possible.
I do not understand the problem you encounter in the macro.
When compare variables, if variable is a percentage number and not a simple number, then system counts only the first 2 digits of number instead of all the digits of number.
Example
If 88% > 20% then execute X command (and of course this is valid because 88 is greater than 20)
But if 105% > 20% then command X is not executed because system reading only the first 2 digits of 105 and reading as 10% !
So 10 is not greater than 20 so command is not executed.
Maybe a solution is to remove the % symbol from both numbers so system can read the numbers normally.
Is that clear now ?
In your code missing $ simbol.
Here you can find a correct code macro with if and working
Your code contains errors.
But this was not the code !
It was just the way of what i test.
If you want the code here it is.
If you try it you see that system finally will execute command “pause” and not command “open tab” and this is not normal.
{
“Name”: “test”,
“CreationDate”: “2019-10-9”,
“Commands”: [
{
“Command”: “store”,
“Target”: “105%”,
“Value”: “var1”
},
{
“Command”: “echo”,
“Target”: “{var1}",
"Value": ""
},
{
"Command": "store",
"Target": "20%",
"Value": "var2"
},
{
"Command": "echo",
"Target": "{var2}”,
“Value”: “”
},
{
“Command”: “if_v2”,
“Target”: “Number ({var1}) > Number ({var2})”,
“Value”: “”
},
{
“Command”: “selectWindow”,
“Target”: “tab=open”,
“Value”: “”
},
{
“Command”: “else”,
“Target”: “”,
“Value”: “”
},
{
“Command”: “pause”,
“Target”: “5000”,
“Value”: “”
},
{
“Command”: “endif”,
“Target”: “”,
“Value”: “”
}
endif is deprecated now you must use end command